群辉版本：7.1

虚拟机扩容

先关闭群晖虚拟机，在esxi虚拟机设置中编辑，将虚拟硬盘调整到想要大小。
5682

SSH扩容过程

root账户下，查看硬盘情况

fdisk -l

Disk /dev/sda: 50 GiB, 53687091200 bytes, 104857600 sectors
Disk model: Virtual SATA Hard Drive
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x425489ac

Device Boot Start End Sectors Size Id Type
/dev/sda1 8192 16785407 16777216 8G fd Linux raid autodetect
/dev/sda2 16785408 20979711 4194304 2G fd Linux raid autodetect
/dev/sda3 21241856 43835391 22593536 10.8G fd Linux raid autodetect

找到需要扩容的硬盘编号，这里是sda，再查看分区大小

parted /dev/sda

GNU Parted 3.2
Using /dev/sda
Welcome to GNU Parted! Type ‘help’ to view a list of commands.
(parted) print
print
Model: VMware Virtual SATA Har (scsi)
Disk /dev/sda: 53.7GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
(parted)

（parted）后面面输入

print

Number Start End Size Type File system Flags
1 4194kB 8594MB 8590MB primary raid
2 8594MB 10.7GB 2147MB primary raid
3 10.9GB 22.4GB 11.6GB primary raid

可以看到，我们需要扩容的分区为sda硬盘的第三分区
返回root用户下，将sda3容量扩展到100%。输入